Vol. 7 No. 1 (2025): JURNAL PERANGKAT LUNAK

Articles

• SISTEM INFORMASI DESA SENCALANG BERBASIS WEBGIS

  Nur Shifaa Sirri, Usman Usman, Fitri Yunita

  1-8

  • PDF
  Abstract views: 74 times | Downloaded: 65 times DOI : https://doi.org/10.32520/jupel.v7i1.3699
• ANALISIS PELAYANAN ADMINISTRASI FAKULTAS TARBIYAH DAN KEGURUAN UIN SUSKA RIAU TERHADAP KEPUASAN MAHASISWA MENGGUNAKAN METODE STRUCTURAL EQUATION MODELLING (SEM)

  Nurhalida Ziah, Nazaruddin

  9-20

  • PDF
  Abstract views: 45 times | Downloaded: 29 times DOI : https://doi.org/10.32520/jupel.v7i1.3719
• OPTIMALISASI RUTE KENDARAAN MENGGUNAKAN METODE SAVING MATRIX SEBAGAI PENENTUAN RUTE DISTIBUSI DARAH DI UTD PMI KOTA PEKANBARU

  Dwi Rahmadhani Mandagiri, Nazzaruddin, Muhammad Nur

  21-31

  • PDF
  Abstract views: 44 times | Downloaded: 27 times DOI : https://doi.org/10.32520/jupel.v7i1.3729
• PERFORMANCE EFFICIENCY ANALYSIS OF WATER TUBE BOILER MACHINE USING INPUT OUTPUT METHOD AND FMEA

  Rahmat Hafis Ghifari, Nazaruddin, Muhammad Nur, Muhammad Isnaini Hadiyul Umam, Suherman

  32-44

  • PDF
  Abstract views: 53 times | Downloaded: 26 times DOI : https://doi.org/10.32520/jupel.v7i1.3759
• ANALISIS PENGENDALIAN KUALITAS PADA PRODUKSI CPO MENGGUNAKAN METODE SIX SIGMA DMAIC

  Fahri Pratama Nasution, Nazaruddin, Muhammad Nur, Muhammad Isnaini Hadiyul Umam, Suherman

  45-61

  • PDF
  Abstract views: 99 times | Downloaded: 88 times DOI : https://doi.org/10.32520/jupel.v7i1.3761
• ANALISIS PENGUKURAN BEBAN KERJA FISIK TERHADAP OPERATOR MESIN BORDIR MENGGUNAKAN METODE NORDIC BODY MAP (NBM) DAN METODE RAPID ENTIRE BODY ASSESMENT (REBA)

  Resky Gunawan, Nazaruddin, Muhammad Nur, Fitriani Suraya Lubis, Rika Taslim

  62-70

  • PDF
  Abstract views: 140 times | Downloaded: 100 times DOI : https://doi.org/10.32520/jupel.v7i1.3921
• PENGARUH TEKNOLOGI DALAM TRANSFORMASI EKONOMI DAN BISNIS DI ERA DIGITAL

  M. Khairi, Bayu Rianto, Chrismondari, Yolnasdi, Muhammad Jalil, Husna Juita, Endi Sudeska

  71-78

  • PDF
  Abstract views: 174 times | Downloaded: 119 times DOI : https://doi.org/10.32520/jupel.v7i1.3947
• RANCANG BANGUN INOVASI PROSES PEMISAH LARUTAN KELAPA PADA PEMBUATAN VCO MENGGUNAKAN BAHAN ALAMI

  Adrian Fakhri, Anwardi, Muhammad Ihsan Hamdy, Muhammad Nur, Harpito

  79-86

  • PDF
  Abstract views: 58 times | Downloaded: 43 times DOI : https://doi.org/10.32520/jupel.v7i1.3982
• ANALISIS POTENSI BAHAYA KERJA MENGGUNAKAN METODE FAILURE MODE & EFFECT ANALYSIS (FMEA) DAN PROCESS DECISION PROGRAM CHART (PDPC)

  Rayvaldo Ikhsan, Muhammad Nur, Muhammad Isnaini Hadiyul Umam, Rika

  87-100

  • PDF
  Abstract views: 57 times | Downloaded: 56 times DOI : https://doi.org/10.32520/jupel.v7i1.3987
• PENERAPAN MULTI-ATTRIBUTE UTILITY THEORY DALAM PEMILIHAN FASILITAS KAMPUS BERDASARKAN PREFERENSI MAHASISWA

  Muhammad Faris, Ainun Nashikha, Elvi Fetrina, Qurrotul Aini, Meinarini Catur Utami

  101-110

  • PDF
  Abstract views: 82 times | Downloaded: 45 times DOI : https://doi.org/10.32520/jupel.v7i1.3996