PERANCANGAN SMART TRASH PENDETEKSI SAMPAH LOGAM DAN NON LOGAM BERBASIS ARDUINO UNO

Dedi Wahyudi

doi:10.32520/jupel.v4i3.2238

Dedi Wahyudi Universitas PGRI Yogyakarta

DOI: https://doi.org/10.32520/jupel.v4i3.2238

Keywords: Smart Trash, Metal, Arduino, IoT, Internet of Things

Abstract

Technological advances, especially in the field of microcontrollers and sensors, have had a major impact on human life. For example, in the field of cleanliness, automatic waste sorting must be done, because nowadays people do not have enough information about the environment, especially about waste disposal. Waste sorting aims to sort waste, in this case into metal and non-metal, so that the waste recycling process becomes more efficient. But in reality, types of waste are still mixed in landfills. Based on these problems, a garbage bin automation was created, a prototype of a microcontroller-based smart trash can whose main function is to sort waste, especially garbage that contains metal elements. Overall, the design of this tool was successful. This can be proven by the test results from a total of 36 (thirty six) respondents 28(78%) respondents answered the system is very interesting, 27(75%) respondents answered the system is very easy to use, 30(83%) respondents answered the system performance is very good, and 33 (92%) respondents answered the system was very useful.

Downloads

Download data is not yet available.

References

[1] N. W. Yuwono, “Pengelolaan Sampah yang Ramah Lingkungan di Sekolah.” [Daring].
Tersedia pada: https://nasih.wordpress.com/2011/05/15/pengelolaan-sampah-yang-ramah-
lingkungan-di-sekolah-2/.

[2] B. Santoso dan M. W. Sari, “Design of Student Attendance System Using Internet of Things
(IoT) Technology,” J. Phys. Conf. Ser., vol. 1254, no. 1, 2019, doi: 10.1088/1742-
6596/1254/1/012064.

[3] S. Wardani dan M. W. Sari, “Pemanfaatan Augmented Reality Pada Katalog Geometri,”
Univ. PGRI Yogyakarta, hal. 402–406, 2015.

[4] M. W. Sari, P. W. Ciptadi, dan R. H. Hardyanto, “Kajian Pengembangan Smart Campus
Menggunakan Teknologi Internet of Things,” Univ. PGRI Yogyakarta, vol. 755, no. 1, hal. 0–5,
2017, doi: 10.1088/1742-6596/755/1/011001.

[5] P. W. Ciptadi dan R. H. Hardyanto, “Penerapan Teknologi IoT pada Tanaman Hidroponik
menggunakan Arduino dan Blynk Android,” vol. 7, no. 2, hal. 29–40, 2018.

[6] M. W. Sari dan S. Wardani, “Rancang Bangun Aplikasi Monitoring Detak Jantung Melalui
Finger Test Berbasis Wireless Sensor Network.”

[7] A. Suyono dan M. Haryanti, “Perancangan Tempat Sampah Otomatis Berbasis
Mikrokontroler Arduino dan GSM SIM 900,” J. Tek. Ind., vol. 5, no. 2, hal. 149–159, 2016.

[8] T. J. Ichsan, T. Gunawan, M. Kom, R. Handayani, dan S. St, “Prototipe Pemilah Sampah
Organik Dan Non-organik,” eProceedings Appl. Sci., vol. 5, no. 3, hal. 2426–2432, 2019.

[9] I. Purnama, S. Z. Harahap, dan A. A. Ritonga, “RANCANG BANGUN TEMPAT
SAMPAH OTOMATIS PADA UNIVERSITAS LABUHANBATU,” vol. 8, no. 2, hal. 1–5,
2020.